Hi - I have been having drop-outs lately and I am thinking is may be related to the rewiring of my network that I have had to do (BB supplier replaced modem and separate router with a combined box).
Looking at the Network Matrix I don't have any coloured squares in the body any more, just down the left side. Is this a change or does it indicate I have a problem.
The configuration I have is (on top floor) Router (Superhub) to STP capable switch (Netgear) then to ZP80 hard wired. ZP100 hard wired to ZP80 using other ethernet port. Remainder (2 x ZP80, 2 x ZP100, 1 x Play3) wireless in 3 story house. Only the router is new but this also does DHCP and the addresses have changed to a new range. All has been rebooted from scratch. Wireless channels are clear of neighbours. All show reasonable noise floors (-89dB or better), the worst being the wired ZP100.
It works most of the time but sometimes stops at random for no apparent reason.
Looking at the Network Matrix I don't have any coloured squares in the body any more, just down the left side. Is this a change or does it indicate I have a problem.
The configuration I have is (on top floor) Router (Superhub) to STP capable switch (Netgear) then to ZP80 hard wired. ZP100 hard wired to ZP80 using other ethernet port. Remainder (2 x ZP80, 2 x ZP100, 1 x Play3) wireless in 3 story house. Only the router is new but this also does DHCP and the addresses have changed to a new range. All has been rebooted from scratch. Wireless channels are clear of neighbours. All show reasonable noise floors (-89dB or better), the worst being the wired ZP100.
It works most of the time but sometimes stops at random for no apparent reason.